MPG Lighting.com LED type controllers

LED Controllers and Switches

Here is a selection of the most popular LED controllers available. From left to right, first our HDWW controller available with
and without a 3PDT switch. This controller will handle HEADLIGHTS and or LED lights up to 20 amps per side. The 3PDT
switch permits you to use your headlights normally, or have them WIG WAG in the opposite mode position of the switch.

Second, our LED third brake light controller. This unit has been designed to use with motorcycle brake lights for safety.
Motorcycle 3rd brake lights are already mandatory in some states. It connects to the ground and positive side of your brake
light and hyper-pulses an optional LED light mounted on the trunk or sissy bar of the motorcycle. Standard 12 volts in and out.

Third, our LDWW LED controller. This is the exact circuit used in our HDWW controller without the relay. It can handle 150
milliamps PER SIDE (300 total) and operate LED lights only! It is a FLOATING GROUND type controller. In other words, NONE
of the output wires can touch each other or touch ground. The two outputs must be wired directly to 12 volt LED lights.
It has a 12 volt input and two floating 12 volt outputs.

Next is our popular STWW LED controller. Rated at 800 milliamps per side (1600 milliamps total) to handle all your LED
chores. Your LED lights will strobe 3 quick times, then wig wag to the other side and strobe 3 quick times
then keep repeating this pattern until turned off. This is the most popular pattern used for emergency vehicles.

Our standard LED strobe (next photo) has a single 12 volt INPUT and output. Handles up to 400 milliamps. Simple
to connect and use. Strobes 3 quick times...pauses and keeps repeating this pattern until turned off. Ideal to use
with our Stealth 4.0 LED lights or any standard 12 volt led lights.

Next, our SA5 switch assembly. This unit was designed to use with ShoMe brand controllers. It features and ON/OFF
rocker switch along side a momentary MODE switch with 2 RED led indicator lights to let the operator see visually
what the outside LED lights are doing. Easy to mount and connect with easy to understand instructions.

Last, our SA1 switch assembly. This switch assembly comes with rocker switch, switch holder, fuse, fuse holder and
connecting wires. Used to turn LED or incandescent lights and controllers ON and OFF.

NOTE: Shipping is for inside US only!
WE NO LONGER ACCEPT PAYPAL! Please contact us via email for ordering information.

Check out our SPECIALS on CONTROLLERS

When we have overstock, discontinued, seconds, samples etc. of LED and incandescent controllers
we offer them at a discount on our SPECIALS page. Check out the bargains and save some money.

OPENS up in a new window!